SERVICE FOR YOUR SUB-ZERO
REFRIGERATION SYSTEM
If you need service, check the model and serial number on
the plate at the top frame of the unit inside the door.
Contact a Sub-Zero Factory Authorized Service Center, a
dealer, or Sub-Zero Freezer Company, Customer Service
Dept., P. O. Box 44130, Madison, WI 53744-4130, call (800)
222-7820, or e-mail us at customerservice@subzero.com.
THINK SAFETY!
If you are storing or disposing of your old refrigerator,
please do it safely.
Child entrapment accidents can be tragic.
19
600
SERIES
INSTALLATION CHECKLIST
The importance of the installation of your Sub-Zero 600
Series unit cannot be overemphasized. The proper installa-
tion of your unit is the responsibility of the selling dealer or
installer.
IMPORTANT NOTE: To ensure a safe and proper installa-
tion, the following checklist should be completed by the
installer to ensure that no part of the installation has been
overlooked.
Any questions or problems about your installation should
be directed to your Sub-Zero dealer or Sub-Zero Customer
Service at (800) 222-7820.
•
Has the unit been secured in place with the provided
anti-tip blocking kit or is there clearance of 1" (25) or
less between the unit and a solid soffit
?
• Are both front levelers extended down to make contact
with the floor? Is the unit level?
• Is the power cord plugged into a properly grounded 3-
prong outlet, which has been installed in accordance
with all applicable electrical codes?
• Is the water supply connected for units with an auto-
matic ice maker? Have you checked for leaks?
• Is the drain pan in the proper position? Has the kickplate
been installed properly?
• Are panels attached securely and properly aligned?
• Have the door(s) been aligned for proper appearance
and operation?
• Have all accessories been installed?
• Have any installation/service problems been noted on
the product registration card? Has the registration card
been mailed in?
• Have stainless steel door(s) been inspected for any
imperfections? This is to be done by the dealer/installer
with the customer upon completion of the installation.
NOTE: Classic, platinum and carbon stainless steel pan-
els are covered by a limited 60 day parts and labor war-
ranty for cosmetic defects.
To Next Page
Loading...
Need help?
General
