Need help?Do you have a question about the Sub-Zero 632/S and is the answer not in the manual?
General| Type | Built-In Refrigerator |
|---|---|
| Width | 36 inches |
| Height | 84 inches |
| Cooling System | Dual Refrigeration |
| Finish | Stainless Steel |
| Energy Star Certified | Yes |
| Product Type | Refrigerator |
| Configuration | French Door |
| Door Style | French Door |
| Ice Maker | Yes |
| Depth | 24 inches |
Highlights safety precautions and signal words (WARNING, CAUTION) used in the manual.
Defines key terms and components of the electronic control system.
Explains how to power the unit on/off, adjust temperatures, and control the icemaker.
Step-by-step guide to entering and using the diagnostic mode for troubleshooting.
Details how to use temperature readings in diagnostic mode to troubleshoot the sealed system.
Illustrates common error codes displayed on the LCD and their meanings.
Provides rules and precautions for working with HFC-134a refrigerant.
Outlines repair procedures for common sealed system problems like leaks and restrictions.
Addresses issues causing warm freezer temperatures with 'VACUUM CONDENSER' flashing.
Addresses issues causing warm refrigerator temperatures with 'VACUUM CONDENSER' flashing.
Provides normal operating pressures and pressure indications for sealed system diagnostics.
Provides tests to verify the integrity of the membrane switch and ribbon cable.
Provides the wiring diagram and schematic for the Sub-Zero 601R model.
Provides the wiring diagram and schematic for the Sub-Zero 601F model.
Provides the wiring diagram and schematic for the Sub-Zero 611 and 650 models.
To Next Page
