Planning Information
Built-In Model 695
Dimensions in parentheses are in
millimeters unless otherwise specified.
3
MODEL OPTIONS
Framed Design 695/F
Partial Framed Design 695/F
(accessory kit required)
Overlay Design 695/O
Classic Stainless Steel 695/S
ACCESSORIES
FRAMP
AR – P
artial framed kit
includes molding and a stainless
steel insert panel for above and
below the glasswell on a framed
unit
FRAMRET – Framed retrofit kit
includes moldings and stainless
steel insert panels to accommo-
date existing Model 690 framed
door panels
Louvered, panel or stainless steel
grilles in 1" (25) increments from
10" (254) to 15" (381) high
Front and grille panels for framed
design in white
, almond and
classic stainless steel
Side panels in white
, almond and
classic stainless steel
Stainless steel and polished
chrome handles for overlay design
Gallon door shelf
Dozen egg container with lid
90˚ and 105˚ door stop kits
Accessories are available through your
Sub-Zero dealer. To obtain local dealer
information, visit the Locator section of
our website
, subzer
o.com.
SPECIFICATIONS
M
odel 695 Side-by-Side Refrigerator / Freezer
w
ith Ice and Water Dispenser
Overall Width 48" (1219)
Overall Height 84" (2134)
Overall Depth 24" (610)
Refrigerator Capacity 18.2 cu ft (515 L)
F
reezer Capacity 9.8 cu ft (278 L)
Minimum Height (levelers in) 83" (2108)
Door Swing Clearance 29
1
/4" (743)
Electrical Requirements
115 V AC, 60 Hz, 15 amp circuit
Plumbing Requirements
1
/4" copper line
Water Supply 20–100 psi
Annual Energy Usage 747 kWh / $ 68
(based on 9.06 cents per kilowatt hour)
Shipping Weight Framed – 610 lbs (277 kg)
Overlay – 610 lbs (277 kg)
Stainless Steel – 656 lbs (298 kg)
Special Note Overlay design is now available
for this ice and water dispensing unit
Specifications are subject to change without notice.
To Next Page
Loading...
