Sub-Zero BI-42SID Use And Care Guide

6 | Sub-Zero Customer Care 800.222.7820
STORAGE
GLASS SHELVES
To remove or adjust a glass shelf, tilt up, then lift up and out.
To reposition, insert the shelf in the tracks along the back
wall, then lower the front until it locks into position. Refer to
the illustration below.
IMPORTANT NOTE: Use care when handling glass shelves to
prevent breakage or scratching the interior.
CAUTION
Glass shelves should warm to room temperature before
immersing in warm water.
Glass shelf removal
Refrigerator Storage
STORAGE DRAWERS
To remove a storage drawer, pull forward until the drawer
stops. Lift the front of the drawer slightly, then pull forward.
Refer to the illustration below.
For French door models, the drawer slides may need to be
pushed back manually to provide sufcient clearance for
removal.
To reinstall, push the drawer slides in. Align the drawer with
the slides and push back until it stops. Press down on the
front of the drawer to engage the slides.
Storage drawer removal

Sub-Zero BI-42SID Specifications

General

Brand	Sub-Zero
Model	BI-42SID
Category	Refrigerator
Language	English