Electronic Control System
3-43
#7005333 - Revision A - January, 2008
Built-In (BI) Series
Built-In (BI) Series
Figure 3-83. Toggle Through Model Codes with Multiple Key Strokes of COLDER or WARMER keys
Until Correct Model Code is Displayed (“36” and “r” = 36” All Refrigerator)
PURE AIR WARMER COLDER WARMER COLDER ALARM POWER MAX ICE ICE MAKER LIGHTS
Figure 3-84. Stop When Correct Model Code is Displayed (“48” and “S” = 48” Side-by-Side)
PURE AIRWARMERCOLDER WARMERCOLDER ALARM POWERMAX ICEICE MAKERLIGHTS
Figure 3-85. Press POWER Key when Correct Code is Displayed, “Pr” and “g” Appear on LCD
Asking if the Code Displayed Should be Programmed/Stored
PURE AIRWARMERCOLDER WARMERCOLDER ALARM POWERMAX ICEICE MAKERLIGHTS
Figure 3-86. Press POWER Key Again - Configuration is Complete,
Model Code is Displayed for 3 Seconds (“48” and “S” = 48” Side-by-Side), then Temperatures are Displayed
PURE AIRWARMERCOLDER WARMERCOLDER ALARM POWERMAX ICEICE MAKERLIGHTS
BI30U
BI30UG
BI36F
BI36R
BI36RG
BI36S
BI36U
BI36UG
BI42S
BI42SD
BI48S
BI48SD
CODE MODEL CODE MODEL
MODEL CODE TABLE MODEL CODE TABLE
* DEFAULT
* DEFAULT SETTING; MUST BE CONFIGURED.
To Next Page
Loading...
