5
Model
ICB648PROG
with Glass Door
Model
ICB648PRO
TOOLS AND MATERIALS REQUIRED
The following is a list of tools and materials
that should be available for proper installation
of the PRO 48.
Phillips screwdriver set
Slotted screwdriver set
Torx drive screwdriver set
1200 mm of 6,35 mm copper tubing and
saddle valve for the water line—part
#4200880
(do not use self-piercing valves)
Copper tubing cutter
Level—0,6 m and 1,2 m recommended
Appliance Dolly able to support 454 kg and
adequate manpower tohandle the weight
of the unit
Various sized pliers
Wrench set
Allen wrench set
11 mm hex bolt nut driver
Crescent wrenches
Cordless drill and assorted drill bits
Masonite, plywood, 3,175 mm pressed
fiberboard, cardboard or other suitable
material to protect finished flooring
Appropriate materials to cover and protect
the home and its furnishings during instal-
lation
INSTALLATION
RECOMMENDATIONS
The importance of the Sub-Zero PRO 48
installation cannot be overemphasized. The
installation procedure should be completed by
a qualified installer.
Before you begin the installation process, it is
recommended that you read this entire Instal-
lation Instructions book. There are key details
that you should take special care to observe
during the installation. By reading these
instructions carefully, you will make the instal-
lation process easier, problem-free and, most
importantly, safe.
The installation process is identical for both
the Model ICB648PROG which features a
glass door on the upper refrigerator compart-
ment and Model ICB648PRO with a solid door.
Any questions or problems about the
installation should be directed to your
Sub-Zero dealer or go to the locator page of
our website, subzero.com, to find the regional
distributor by country.
PRO 48 INSTALLATION RECOMMENDATIONS
To Next Page
Loading...
Need help?
General
