TIMER CLOCK
The clock must be set prior to use and after a power outage.
Setting the clock:
Touch STOP/CLEAR1.
Touch TIMER/CLOCK once for 12-hour mode or twice for 24-hour mode2.
Use the number pads to enter the time of day3.
Touch START4.
The timer can be set for a maximum of 99 minutes and 99 seconds. Once a time is set, the countdown appears
on the control panel display. The microwave chimes and END appears on the display when complete.
Setting the timer:
Touch TIMER/CLOCK1.
Use the number pads to enter timer duration2.
Touch START to begin3.
Touch STOP/CLEAR to cancel4.
SETTINGS
The settings feature allows the user to select individual preferences. Preference must be reset after a power out-
age.
AUDIBLE SIGNAL
An audible signal chimes with every touch and upon cook time and timer completion.
To eliminate signal:
Touch SETTINGS - control panel display scrolls “
TOUCH DECREASE FOR SOUND OFF”1.
Touch DECREASE - control panel display scrolls “
SOUND OFF - TOUCH START”2.
Touch START3.
“SOUND OFF” appears on the control panel display, then the time of day4.
To restore signal:
Touch SETTINGS - control panel display scrolls “
TOUCH INCREASE FOR SOUND ON”1.
Touch INCREASE - control panel display scrolls “SOUND ON - TOUCH START”2.
Touch START3.
“
SOUND ON” appears on the control panel display, then the time of day4.
Microwave Drop-Down Door Series
Microwave Drop-Down Door Series
Controls & Operation
Controls & Operation
2-2
#826151 - Revision A - March, 2016
CONTROLS
This section describes the basic operation of the Drop-Down Door Microwave and how the touch panel assembly
responds to input commands.
Panel Assembly
To Next Page
Loading...