EasyManuals Logo

Sub-Zero Wolf Drop-Down Door Series User Manual

Sub-Zero Wolf Drop-Down Door Series
45 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
Page 9
Controls & Operation
Controls & Operation
Microwave Drop-Down Door Series
Microwave Drop-Down Door Series
2-3
#826151 - Revision A - March, 2016
COOK TIME COMPLETION REMINDER
Upon completion, the microwave oven chimes every ten seconds for the first minute; then every three minutes
(for one hour) until STOP/CLEAR is touched.
To eliminate reminder:
Touch SETTINGS twice - control panel display scrolls “
REMIND SIGNAL ON TO TURN REMIND SIGNAL OFF1.
TOUCH DECREASE
Touch DECREASE - control panel display scrolls “REMIND SIGNAL OFF TOUCH START2.
Touch START3.
REMIND SIGNAL OFFappears on the control panel display, then the time of day4.
To restore reminder:
Touch SETTINGS twice - control panel display scrolls “
REMIND SIGNAL OFF TO TURN REMIND SIGNAL ON1.
TOUCH INCREASE
Touch INCREASE - control panel display scrolls “REMIND SIGNAL ON TOUCH START2.
Touch START3.
REMIND SIGNAL ONappears on the control panel display, then the time of day4.
WEIGHT UNIT
For cooking modes where weight is required, the default unit of measure can be change from pounds to kilo-
grams.
To change unit of measure to kilograms:
Touch SETTINGS three times - display scrolls “
CHANGE WEIGHT TO KGS? TOUCH DECREASE”1.
Touch DECREASE - control panel display scrolls “WEIGHT KGS TOUCH START2.
Touch START3.
KGS SETappears on the control panel display, then the time of day4.
To change unit of measure to pounds:
Touch SETTINGS three times - display scrolls “
CHANGE WEIGHT TO LBS? TOUCH INCREASE1.
Touch INCREASE - control panel display scrolls WEIGHT LBS TOUCH START2.
Touch START3.
LBS SETappears on the control panel display, then the time of day4.
FACTORY SETTINGS
To restore the microwave oven to factory settings:
Touch SETTINGS four times - display scrolls “
TOUCH START TO RESTORE FACTORY SETTINGS1.
Touch START2.
FACTORY SETTINGS RESTORED” appears on the control panel display, then the time of day.3.
DEMONSTRATION MODE
Demonstration mode allows operation to be demonstrated without powering the magnetron.
To enter demonstration mode:
Touch SETTINGS five times - display scrolls
DEMO ON? TOUCH INCREASE1.
Touch INCREASE - display scrolls “
TOUCH START2.
Touch START3.
DEMO ONappears on the control panel display, then “DEMOremains on the display4.
To exit demonstration mode:
Touch SETTINGS five times - display scrolls “
DEMO OFF? TOUCH DECREASE1.
Touch DECREASE - display scrolls “TOUCH START2.
Touch START3.
DEMO OFFappears on the control panel display, then the time of day4.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sub-Zero Wolf Drop-Down Door Series and is the answer not in the manual?

Sub-Zero Wolf Drop-Down Door Series Specifications

General IconGeneral
BrandSub-Zero
ModelWolf Drop-Down Door Series
CategoryMicrowave Oven
LanguageEnglish

Related product manuals