7-32
Starting and operating
3. Push the control lever downward in the “SET,
COAST” direction and release it. Then release the ac-
celerator pedal.
The vehicle will maintain the desired speed.
Vehicle speed can be temporarily increased while
driving with the cruise control activated. Simply de-
press the accelerator pedal to accelerate the vehicle.
When the accelerator pedal is released, the vehicle
will return to and maintain the previous cruising speed.
To temporarily cancel the cruise con-
trol
There are four ways to cancel the cruise control tem-
porarily:
y Depress the brake pedal.
y Pull the control lever in the “CANCEL” direction. (if
so equipped)
y Depress the clutch pedal (manual transmission ve-
hicles only).
y Shift the selector lever into the “N” position (auto-
matic transmission vehicles only).
To resume the cruise control after it has been tempo-
rarily canceled and with vehicle speed of about 20
mph (32 km/h) or more, push the control lever upward
in the “ACCEL, RESUME” direction to return to the
original cruising speed automatically.
To turn off the cruise control
Therearetwowaystoturnoffthecruisecontrol:
y Pushthemainswitchagain.
y Turn the ignition switch to the “ACC” or “LOCK” po-
sition (but only when the vehicle is completely
stopped).
To change the cruising speed
T To increase the speed (by control lever)
Push the control lever upward in the “ACCEL, RE-
SUME” direction and hold it until the vehicle reaches
ACC
RES
CANCEL
SET
COAST
HS7018BA
To Next Page
Loading...
