197
2-1. Driving procedures
2
When driving
BRZ_EGE
■ Operation of the push-button ignition switch
If the switch is not pressed shortly and firmly, the push-button ignition switch
mode may not change or the engine may not start.
■ Access key battery depletion
→P. 4 5
■ Conditions affecting operation
→P. 4 1
■ Note for the “keyless access” entry function
→P. 4 2
■ If the engine does not start
The engine immobilizer system may not have been deactivated. (→P. 108)
We recommend that you contact any authorized SUBARU dealer or repairer,
or another duly qualified and equipped professional.
■ Steering lock
After turning the push-button ignition switch off and opening and closing the
doors, the steering wheel will be locked due to the steering lock function.
Operating the push-button ignition switch again automatically cancels the
steering lock.
Vehicles with an automatic transmission:
Check that the select lever is securely set
in P. The engine may not start if the select
lever is displaced out of P. The keyless
access with push button start system indi-
cator light (green) will flash quickly.
To Next Page
Loading...
