322
3-2. Using the audio system
BRZ_EGE
Switching the display
Press .
Each time is pressed, the display changes in the following order:
Track title/Elapsed time → Folder name → File name → Album title (MP3
only) → Track title → Artist name
■ USB memory functions
Depending on the USB memory that is connected to the system, certain
functions may not be available. Disconnecting the device and reconnecting it
once again may resolve some malfunctions.
■ Display
→P. 299
■ Error messages
“ERROR 1”: This indicates a problem either in the USB memory or inside
the USB box or connection between them.
“ERROR 3”: This indicates that the USB memory may be malfunctioning.
“ERROR 4”: This indicates that an overcurrent error has occurred.
“ERROR 5”: This indicates that an USB memory communication error has
occurred.
“NO MUSIC”: This indicates that no MP3/WMA files are included in the
USB memory.
■ USB memory
● Compatible device
USB memory that can be used for MP3 and WMA playback.
Depending on the type of USB device, playback may not be possible.
To Next Page
Loading...
