399
4-3. Do-it-yourself maintenance
4
Maintenance and care
BRZ_EGE
■ How to initialize the tire pressure monitoring system (if
equipped)
Park the vehicle in a safe place and turn the push-button igni-
tion switch off.
Initialization cannot be performed while the vehicle is moving.
Adjust the tire inflation pressure to the specified cold tire infla-
tion pressure level. (→P. 555)
Make sure to adjust the tire pressure to the specified cold tire infla-
tion pressure level. The tire pressure monitoring system will operate
based on this pressure level.
Turn the push-button ignition switch to “ON” mode.
Press and hold the tire pressure
monitoring reset switch until the
tire pressure monitoring light
blinks slowly 3 times.
STEP
1
STEP
2
STEP
3
STEP
4
To Next Page
Loading...
