l This device is precision-engineered equipment and the recorded
data can be lost as a result of static electricity, electrical noise,
vibration, or other inuences. To protect the device against data
loss, we recommend keeping a separate record of the data that
you record after purchase.
l The screen may be adversely af
fected or disturbed by noise if
electrical equipment that generates powerful electrical noise
is used near the system. In such cases, keep the electrical
equipment at a distance, or refrain from use.
l The display may appear
brighter when the temperature is low,
or immediately after starting the engine, however, this is a
characteristic of the LED elements, and does not indicate a fault.
The display will return to its original brightness when the vehicle
cabin has warmed up.
l When you look at the screen through polarized material such
as polarized sunglasses, the screen may be dark and hard to
see. If so, look at the screen from different angles, adjust the
screen settings on the general settings screen or take off your
sunglasses.
l It may
be difcult to view the screen if the display is exposed to
sunlight from an awkward angle.
l The LCD screen may not function normally if covered with a
protective lm. Do not afx a protective lm.
l The touch panel may function incorrectly or fail to respond if
operated
with objects other than ngers (nails, operation when
wearing gloves, pens, etc.)
l When inserting or removing
CDs, take care not to touch the
touch panel. The touch panel will respond if inadvertently
touched by hand.
l If the system functions unexpectedly such as an area other than
the one touched being selected, or failure to respond when
touched, there is a possibility that another nger or part of the
hand is in contact with display.
l Scratches on the system panel surface are easily noticeable,
and it should therefore be handled with care.
INTRODUCTION
INTRODUCTION
9
docstructure.indb 9 2019/05/31 14:14:48
To Next Page
