To Next PageTo Next PageHow to activate Adaptive Cruise Control on my Subaru Automobile?
First, ensure you've pressed the (CRUISE) switch; the (Adaptive Cruise Control indicator) won't appear if you haven't. If EyeSight operation has temporarily stopped, correct the cause and then try setting Adaptive Cruise Control again. Finally, Adaptive Cruise Control can only be set when the (READY indicator) is displayed.
Why does my Subaru Forester Eyesight 2022's EyeSight not restart after stopping?
EyeSight may not restart due to several reasons. If you're driving in the rain with poorly performing wipers or if there's a smear on the windshield, replace the wipers or clean the windshield. Heavy rain, snow, fog, or dust can also cause EyeSight to temporarily stop. Additionally, direct sunlight or bright headlights at night might also cause a temporary stop.
Why is my Subaru Forester Eyesight 2022 Automobile not detecting the vehicle in front?
There are several reasons why your Subaru might not be detecting the vehicle in front. Detection can be difficult if the vehicle in front is stopped, moving slowly, or is extremely slow. A dirty or fogged windshield can also impede detection. Detection isn't possible if the vehicle is too far away or if you are on a curve or a road with uphill and downhill grades. Detection may be delayed after the vehicle in front changes, or when water or snow is kicked up.
Why is Subaru Forester Eyesight 2022 Automobile's Adaptive Cruise Control activating without a car in front?
Adaptive Cruise Control might activate if a vehicle in a neighboring lane is detected, or if you are driving on or near a curve. Braking control may be activated in response to guardrails, the angle of the steering wheel, or roadside structures when driving on a curve.
Why won't Lane Centering Function activate in my Subaru Forester Eyesight 2022?
Lane Centering Function only activates when Adaptive Cruise Control is also activated. Also, verify that Lane Centering Function is turned on in the customizing functions, as Lane Departure Prevention Function activates when Lane Centering Function is set to off.
Why is acceleration inconsistent in my Subaru Automobile when a lead vehicle turns or moves away?
EyeSight's reaction may be slower when detection of the vehicle in front is lost, which can cause the start of acceleration to feel delayed and braking time to feel longer than expected. Also, acceleration may vary depending on the selected cruise control mode.
Why does the Lead Vehicle Start Alert activate with no car in front of my Subaru Forester Eyesight 2022 Automobile?
The Lead Vehicle Start Alert may issue a warning in response to objects other than a vehicle that appears in front of your vehicle, depending on surrounding objects, traffic environment and weather.
Why does 'Keep Hands On Steering Wheel' appear when I am holding the wheel in my Subaru Forester Eyesight 2022?
Operate the steering wheel until the interruption screen disappears. If the system continues to not detect any operation, Lane Centering Function may be canceled. Also, “Keep Hands On Steering Wheel” will be displayed if the vehicle is likely to depart the lane when Lane Centering Function is active.
Why aren't Lane Centering/Departure Prevention working with lane markers in my Subaru Forester Eyesight 2022?
The width of the road should be between approximately 10 ft (3 m) and 15 ft (4.5 m) for Lane Centering Function and Lane Departure Prevention Function to operate.
Why doesn't Lane Centering Function activate with a lead vehicle in my Subaru Forester Eyesight 2022 Automobile?
Lane Centering Function does not activate when the lead vehicle is a motorcycle or another 2-wheeled vehicle, super-compact car, or other narrow vehicle. Also, Lane Centering Function may not activate when there is a speed difference between the lead vehicle and your vehicle or when the lead vehicle is meandering or driving at the edge of the lane.
General| Brand | Subaru |
|---|---|
| Model | Forester Eyesight 2022 |
| Category | Automobile |
| Language | English |
Details on how to handle the stereo camera to ensure proper EyeSight operation.
A list of all EyeSight functions and their corresponding page numbers for detailed information.
Explains how the system automatically steers to avoid collisions with vehicles or pedestrians.
Maintains set speed and follows detected vehicles, assisting with driving comfort.
Assists steering to keep the vehicle centered in the lane and follow a lead vehicle.
Assists steering to prevent unintentional lane departure by detecting lane markings.
