Subaru RGV12100 - Engine Oil

ENGLISHFRANÇAISEESPAÑOL
-
3
-
LOCK
UNLOCK
STOPPER
Check that following
accessories come with your
SUBARU Generator.
(1) Instruction for use
(2) Wheel mounting parts (See page 37.)
(3) Servicing tools
(4) Battery mounting bracket
(See page 8 and 9.)
Be sure to replenish with
engine oil.
(See page 6 for details.)
Notes on installation
1. If you provide the generator with wheels,
always be sure to place
the generator on a level surface, locking
the wheel with the stopper and/or
chocking the wheels.
2. Select a place which allows you to
maintain and inspect the generator,
which is not exposed to contamination
caused by exhaust gas.
If you are planning to install the
generator without its wheels attached, consider the work efficiency in terms of
an oil change.
3. In ground connection, be sure to use the designated ground terminal.
(A grounding cable is not included in the set of accessories.)
4. During use, be sure not to disconnect the battery.
5. While the power is on, do not unplug the unit or disconnect cables from the
terminals.
RGV13100usGU7306.indd3RGV13100usGU7306.indd3 2012/01/2315:22:472012/01/2315:22:47