Subaru RGX6500/E - Generator Operating Procedures; Starting the Generator and Warm-up

ENGLISHFRANÇAISEESPAÑOL
-
12
-
5. OPERATING PROCEDURES
(a) Turn the Engine switch to the position
"ON".
(b) Turn the AC circuit breaker to the
position "OFF".
(c) Open the fuel valve.
(d) Set choke lever to close if the engine
is cold.
STARTING THE GENERATOR
Check the oil level before each operations as outlined by the article
"CHECK ENGINE OIL"
[
CAUTION
]
ON
OFF
OPEN
CLOSE
CLOSE
Choke lever
CLOSE
OPEN
ON
OFF
ON
OFF
RGX7500usGU7220.indd12 2011/06/1521:48:56