Subaru SGX5000 - Release Generator Handles

ENGLISHFRANÇAISEESPAÑOL
-
34
-
Locate the following items:
2 Handle lock pins
2 Lanyards

Attach the lanyard to the handle lock pin and the handle.

Extend the handle, then insert the pin through the hole in the handle and the
generator frame to secure handle in place.

Repeat the process on the other side to lock the other handle.
Do not attempt to lift the unit by the handle assembly. If it is necessary to lift
the generator, always grasp by the frame. Use proper lifting techniques to
avoid back injury.
[
CAUTION
]
RELEASING THE HANDLES
Remove the handle lock pins and lower the handles to the down position.
SGX7500usGU7064.indd34
SGX7500usGU7064.indd34
2010/07/2214:04:41
2010/07/2214:04:41