How to operate
Starting Your New Thermoelectric Cooler
1.
a clean moist cloth.
2. Insert the power supply cord into the socket.
Normal operating
When the cooler works with full power, the two LEDs on the circuit board will flash.
The red one shows the power input status. The green one shows the output status of
the cooling system. Meanwhile the fan inside the cooler begins to work. When the door
is opened, the light under the temperature adjustor will turn on automatically. The
temperature range for cooler is 3
o
C to 15
o
C. When the temperature is set on one
certain point and the temperature inside reaches this point, the automatic temperature
control system begins to work and the cooling system goes into linear temperature
keeping status.
Note: Wait 3-5 minutes before restarting if you unplug the cooler. The unit may fail to
operate properly if restarted too quickly.
Clean the cooler thoroughly. Wipe the outside with a soft dry cloth, the interior with
6. WATER BOX
7. REAM COVER
8. MAGNETIC SEAL
9. CAN DISPENSER
10. DOOR
1.
2. LIGHT
3. FAN MASK
4. SHELF
5. FOOT
TEMPERATURE CONTROL PANEL
4
STRUCTURE
To Next Page
Loading...
