How to clean
Cleaners: Never use harsh, abrasive cleaners, heavy-duty cleaners, or solvents on
any surface.
Exterior: Wipe with damp, sudsy cloth, rinse and dry. For stubborn stains and for
periodic waxing, use silicon wax.
Cooler Section: Wash shelves and other removable parts in warm sudsy water
,
rinse and dry. Wash interior with baking soda solution (3 tablespoons to I liter of
water) or warm sudsy water, rinse and dry.
Magnetic Door Seals: Wash with warm sudsy water.
The Finishing Touch: Replace all parts and return thermostat dial to desired setting.
How to install
Install cooler in a convenient location away from extreme heat and cold. Allow
sufficient clearance between the cooler and side wall so the door will open without
obstruction. Cooler is not designed for recessed installation.
Select a space with strong level floor.
Allow 2 inches (5cm)of space between the cooler's side & wall and 4 inches (10cm)
between back & the wall.
Power cord replacement
If the supply cord is damaged, it must be replaced by the manufacture or its service
agent or a similarity qualified person in order to avoid a hazard.
5
INSTALLATION & MAINTENANCE
To Next Page
Loading...
