EasyManua.ls Logo

Subcold SUPER 85 - Disconnecting Your Appliance; Safety Warnings

Default Icon
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13
Power Failure and Extended Non-Use Guidelines:
In the event of a power failure, the appliance can maintain normal storage for several hours. During a power
outage, refrain from adding new items to the appliance and minimise the frequency of door openings.
For short vacations, ensure all items are removed before closing the door securely. During extended vacations,
disconnect the appliance from the power source, defrost, clean, wipe it dry, and leave the door open.
If the appliance will not be used for an extended period, unplug it from the power source, clean the appliance,
and keep the door open to prevent unpleasant odours/mold.
Warning: Avoid using any other equipment or method to assist the defrost process, as it may cause damage to
the cooling system.
Note: Under normal working conditions, do not immediately restart the power; wait at least 5 minutes before
powering back on.
Always handle the appliance with care to prevent any potential damage.
Avoid exposure to open flames, gas, or other harmful substances.
Refrain from splashing water on the rear of the appliance, as it may lead to malfunction or electric shock.
Do not store flammable materials, such as ether, benzene, or LP gas, near the appliance.
Avoid placing magnetic, heavy, or water-filled objects on top of the appliance.
The refrigerant used in this product is R600a, which is inflammable. Exercise caution to prevent damage
to the cooling system during transportation and installation.
For proper disposal, contact a local WEEE waste removal company or local recycling centre in your area.
Refrain from using electrical appliances inside the unit unless they are of the type recommended by the
manufacturer.
All affected or faulty parts, including the light, should be replaced by a certified technician.
To prevent hazards, the power cable must be replaced by the manufacturer, its service agent, or similarly
certified/qualified persons when damaged.
Disconnecting Your Appliance
Safety Warnings

Related product manuals