7
This appliance should be maintained and cleaned frequently. For your safety, ensure to unplug the socket from
the main power source before cleaning.
Heavy frost will influence the refrigeration of the appliance and increase the energy consumption. Thus,
defrosting is needed when the frost is as thick as 5 mm. The process for manual defrost are listed as follows:
❑ Interior maintenance
Clean the interior of the appliance with clean water and non-haz cleaner and wipe it with dry with a cloth.
❑ Maintenance of the door gasket
It is easy to cause damage if the door gaskets if not cleaned well. Ensure the gasket is cleaned sufficiently.
❑ Outer maintenance
Wipe the dust off with a dry clean cloth.
In case of a power failure, the refrigerator can store items normally for several hours.
❑ During power failure
If there is a power failure, do not put new items in the refrigerator and minimize the frequency of door opening.
❑ During vacation
For a short vacation, ensure that all items in the fridge are removed before the vacation and close the door firmly.
if on a long vacation, the appliance can be disconnected from the power source; defrot, clean and wipe-it dry,
and leave its door open.
❑ Not in use
If the refrigerator will not be used for a long time, please unplug it from the outlet and clean the appliance. The
door should be kept open in order to prevent unpleasant smells
• Take all the items out of the fridge;
• Remove the shelves;
• Unplug the power cord;
• Open the doors and wait for thawing;
• Wipe the defrost water with a dry cloth.
Warning: Do not use any other equipment or method to assist the defrost process. It may cause damage to the
cooling system.
Attention: In a general working conditions, do not restart the power immediately, please leave at at least 5
minutes before powering back on.
To Next Page
Loading...
