8
❑ Do not expose water to the refrigerator, as it will lead to oxidation which may cause malfunction or
damage.
❑ Cleaning materials such as soap powder, abrasive cleaning powder, alkali cleansers, chemicals, thinners,
alcohol, acid petroleum and very hot water should not be used to clean the refrigerator as they may
damage the painted covers and plastics.
❑ Heat can damage the interior plastic components.
❑ Ensure to check the following after maintenance:
• Is there any damage or loss of power ?
• Can the plug be put in the socket reliably and smoothly?
• Is the plug heating unconventionally?
You can easily solve some common problems in the unit which will save you the cost for a possible service charge
by technician. Try the suggested points below to see if you can solve the problem before calling a technician.
Warning: Please remove the gasket of the door before disposal. The disposal should be handled by a trained
personnel, as it may be harmful to the environment.
PROBLEMS POSSIBLE CAUSE
The refrigerator does not work
• It may not be connected to the power supply. Plug,
power cut or fuse; Voltage may be too low.
• Circuit breaker tripped or blown fuse
• The control panel is set incorrectly
The refrigerator does not work efficiently as
expected
• It may be caused by heavy frost, or by warm
temperature setting, or by frequent door openings.
Turns on and off frequently
• Room ambient temperature is hot
• Door open frequently
• Door not closed tightly
• The temperature control panel is not set right
• Door gasket not sealed properly
• Unit not having correct clearances
It makes an unusual noise
• It may be caused by an imbalance in the position
• The compressor keeps working for a long period
• The environment temperature may be high.
• The door may be opened frequently or even left
opened.
• A low temperature control setting may increase
the working time of the compressor.
To Next Page
Loading...
