Do you have a question about the Suburban NT-20SE and is the answer not in the manual?
BTU/hr | 20, 000 |
---|---|
Voltage | 12V DC |
Input BTU | 20, 000 |
Output BTU | 16, 000 |
Efficiency | 80% |
Ignition Type | Direct Spark Ignition |
Fuel Type | Propane |
Essential warnings about fire, explosion, and proper usage to prevent injury or damage.
Step-by-step instructions for immediate actions if a gas leak is detected.
Requirements for qualified personnel and proper installation procedures.
Advice on unit placement, supervision, and preventing ignition of materials.
Owner's duties for monthly checks, area clearance, and basic upkeep.
Requirements for annual inspection, servicing by qualified personnel, and post-service verification.
Essential checks for venting, burner flame, gas leaks, and airflow during operation.
Prohibitions against DIY repairs, using damaged parts, and operating with hazards.
Safety notes on vent screens, add-on rooms, and covering vents.
Crucial steps before startup, including gas checks and reading safety warnings.
Sequential instructions for safely starting, operating, and shutting down the furnace.
Guidelines for operating gas shut-off valves and handling water-damaged components.
Procedure for safely shutting off the gas supply to the furnace.
Details required when ordering replacement parts from a dealer or service center.
List of components with part numbers for specific models (NT-16SE, NT-20SE).
Procedure for obtaining warranty service and payment guidelines.
Specific warranty coverage for the heat exchanger unit.
Exclusions and limitations on expressed and implied warranties.
Items for which the owner is responsible, not covered by warranty.
Steps to follow when experiencing a product issue, including contacting service centers.