Need help?Do you have a question about the Suburban SW10P and is the answer not in the manual?
General| Model | SW10P |
|---|---|
| Capacity | 10 Gallons |
| BTU Rating | 10, 000 BTU |
| BTU/hr | 10, 000 BTU/hr |
| Ignition | Direct Spark Ignition |
| Weight (lbs) | 85 lbs |
| Heating Method | Direct Spark Ignition |
| Recovery Rate (Gallons per Hour at 90°F Rise) | 10 GPH |
Safety precautions, lighting steps, and electrical connections for reignitor models.
Safety, gas leak procedures, and operating steps for DSI water heaters.
Safety, gas leak procedures, and operating steps for 120V DSI water heaters.
Step-by-step functional sequence of the DSI water heater operation.
Procedures for testing components and recommended solutions for faults.
Describes the sequence and troubleshooting for the electric heating system.
Provides instructions and diagrams for measuring flame current.
To Next Page
