EasyManua.ls Logo

Sufag Eco - Transformer and Socket Breaker Issues

Sufag Eco
25 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
____________________________________________________________________________________
Operating Manual access/eco/peak/power/silent Page
21
4
D
EFECTS -
C
AUSES -
S
OLUTIONS
Solution:
Always replace defective heating. Heating which has not been repaired will
normally lead to another dysfunction within a short time.
4.4. Tripped breaker for transformer 230 VAC: F5 resp. F4 for compact-peak
Possible reasons and solution:
Check the load of the transformer and reset the automatic breaker.
4.5. Tripped breaker for socket: Q2 resp. Q3 for compact-peak
Possible reasons and solution:
The grounded socket is secured by a proper fault current automatic cutout
switch with 13A / 0.03A. Check the performance of the connected devices –
maximum charge 2500 W.
Please also make sure that the grounded socket is connected via the neutral of the
supply. The socket is not able to function at mains without a neutral.

Related product manuals