SUG AWI-60 - Specifications; Technical Data and Models

SPECIFICATIONS
Model (without
communication)

AWI-10

AWI-30

AWI-60

AWI-100
Minimum division
value
0.01
0.1
Maximum operating
range
10N.m/7.37ft.lb/8
8.50in.lb/101.97k
gf.cm
30N.m/22.12ft.lb/
265.5in.lb/305.91
kgf.cm
60N.m/44.25ft.l
b/531.04in.lb/61
1.82kgf.cm
100N.m/73.7ft.lb/
885.0in.lb/1019.7
kgf.cm
（N.m）
Connector
（
inches
）
1/4 inches
3/8 inches
1/2 inches
Setting range of
buzzer（N.m）
0.3~10N.m
0.9~30N.m
1.8~60N.m
3~100N.m
Length (mm)
230mm
240mm
285mm
Accuracy*1
Clockwise
：
±2% Counterclockwise
：
±2.5%
Preset Value Memory
Capacity
9
Operation Mode
Peak mode
（
P
）
/ Real-time mode
（
T
）
Unit
N.m, kgf.cm, lbf.ft, lbf.in
Form of ratchet head
Bidirectional ratchet head
Number of ratchet
teeth
72 teeth
Number of buttons
5 buttons
Battery
Two AAA batteries
Operating
temperature
-10℃ to 60℃
Storage temperature
-20
℃
to 70
℃
Test falling height
one meter
Vibration test
condition*2
10G
Service life test*3
10000 times
*1. The accuracy is available within the range of 20% to 100% of the maximum operating value. The
torque accuracy is a normal value. The correction accuracy adopts an intermediate groove of five
grooves on a grip as a correction point. In order to ensure the accuracy, it is suggested to correct the
wrench once a year.
*2. The vibration test includes the horizontal test and vertical test.
*3. "One test time” refers to the process of applying the force from 0 N.m to the maximum operating
value of the wrench and then returning to 0 N.m.