Sullair 185 - Page 59

Table 7-3: Annual engine vibration mount inspection
Table 7-4: Annual frame, canopy and parts inspection
185 T4F Kubota User Manual 7: Noise Control
02250216-781 R02
Subject to EAR, ECCN EAR99 and related export control restrictions. 57
At least annually inspect engine vibration mounts for security of attachment and to make sure the resilient parts are intact. Do
not operate compressor with defective engine mounting system. Remove and replace defective parts by ordering with part
numbers indicated in Parts List.
Maintenance performed:
By:
Location:
Date:
Maintenance performed:
By:
Location:
Date:
Maintenance performed:
By:
Location:
Date:
At least annually inspect frame, canopy and parts, for security of
attachment. Make sure there are not any missing or
deformed members, including all hinged doors, covers and their fastening devices. Do not operate compressor with defective
frame, canopy and parts. Remove and replace defective parts by ordering with part numbers indicated in Parts List.
Maintenance performed:
By:
Location:
Date:
Maintenance performed:
By:
Location:
Date:
Maintenance performed:
By:
Location:
Date: