Sullair 24KT 12B-50 User Manual

Operator’s Manual
Series 12 & 16 40, 50, 60 and 75 HP Standard & 24 KT
Industrial Rotary Screw Air Compressor
Part Number 252646-002
©Sullair Corporation

Sullair 24KT 12B-50 Specifications

General

Brand	Sullair
Model	24KT 12B-50
Category	Air Compressor
Language	English

Summary

Section 1 Safety

1.1 General

General safety precautions for operation and maintenance.

1.2 Personal Protective Equipment

Requirements for user protection during operation and maintenance.

1.3 Pressure Release

Procedures for safely releasing pressure before maintenance.

1.4 Fire and Explosion

Precautions to prevent fire and explosion hazards.

1.5 Moving Parts

Safety measures related to moving components.

1.6 Hot Surfaces, Sharp Edges and Sharp Corners

Hazards associated with hot surfaces and sharp edges.

1.7 Toxic and Irritating Substances

Precautions for handling toxic and irritating materials.

1.8 Electrical Shock

1.9 Lifting

1.10 Entrapment

Section 5 Operation

5.3 Initial Start-Up Procedure

Step-by-step guide for initial compressor startup.

Section 6 Maintenance

6.3 Maintenance After Initial 50 Hours of Operation

6.4 Maintenance Every 1000 Hours

6.5 Filter Maintenance

6.6 Separator Maintenance

6.7 Parts Replacement and Adjustment Procedures

Detailed procedures for replacing parts and adjustments.

6.8 Troubleshooting

Guidance for diagnosing and resolving common issues.

Section 2 Description

2.3 Sullair Compressor Unit, Functional Description

2.4 Compressor Cooling and Lubrication System, Functional Description

2.5 Compressor Discharge System, Functional Description

2.6 Control System, Functional Description

Functional description of the compressor control system.

2.7 Air Inlet System, Functional Description

2.8 Instrument Panel Group, Functional Description

Functional description of the instrument panel.

Section 3 Specifications

Compressor

Motor: (60 Cycle Compressors)

Section 4 Installation

4.1 Mounting of Compressor

4.2 Ventilation and Cooling

4.3 Service Air Piping

4.6 Electrical Preparation

4.7 Motor Rotation Direction Check