SECTION 8 DHL HEATLESS REGENERATIVE DRYER
63
8.8 ID—DHL2500-3000
ITEM QTY DESCRIPTION
1 2 4” INLET VALVE WAFER STYLE BUTTERFLY VALVE
HIGH PERFORMANCE, WITH DOUBLE ACTING ACTU-
ATOR
2 2 2” NPT DEPRESSURIZATION VALVE, ANGLE BODY
PISTON TYPE
3 2 2” NPT PURGE EXHAUST VALVE, ANGLE BODY PIS-
TON TYPE
4 2 2” NPT PURGE EXHAUST MUFFLER
5 2 2” NPT DEPRESSURIZATION MUFFLER
6 2 4” OUTLET CHECK VALVE, WAFER STYLE
7 1 2” NPT PURGE ADJUSTMENT VALVE
8 1 2” NPT ORIFICE UNION
9 2 2” NPT PURGE CHECK VALVE
10 1 PURGE PRESSURE GUAGE, 3 1/2” DIA. 0-200 PSIG
11 2 1 1/2” NPT PRESSURE RELIEF VALVE
12 2 TOWER PRESSURE GAUGE, 3 1/2” DIA. 0-200 PSIG
13 1 CONTROL AIR FILTER
14 2 DESICCANT TOWER
15 1 ELECTRICAL ENCLOSURE
16 1 TOWER SELECTOR VALVE, 4-WAY, 2-POS, DUAL SOL.
17 (NOT USED)
18 (NOT USED)
19 1 CONTROL AIR PRESSURE REGULATOR AND GUAGE
20 1 DRAIN SOLENOID VALVE FOR PRE-FILTER
21 1 LEFT TOWER DEPRESSURIZATION PILOT VALVE, 3-
WAY, SOLENOID OPERATED
22 1 LEFT TOWER PURGE EXHAUST PILOT VALVE, 3-WAY,
SOLENOID OPERATED
23 1 RIGHT TOWER DEPRESSURIZATION PILOT VALVE, 3-
WAY, SOLENOID OPERATED
24 1 RIGHT TOWER PURGE EXHAUST PILOT VALVE, 3-
WAY, SOLENOID OPERATED
ITEM QTY DESCRIPTION
To Next Page
Loading...
