Need help?Do you have a question about the Sullair ES-6 and is the answer not in the manual?
General| Horsepower | 5 hp |
|---|---|
| Pressure | 125 psi |
| Cooling System | Air Cooled |
| Power | 5 hp |
| Working Pressure | 125 psi |
| Frequency | 60 Hz |
| Drive Type | Direct drive |
| Drive | Direct drive |
Requirements for eye, respiratory, and other protective gear when operating the compressor.
Safety measures to prevent electrical shock during operation and maintenance.
Detailed explanation of the compressor unit, fluid system, and motor drive.
How the control system regulates compressor capacity based on system demand.
Technical specifications including dimensions, KW, pressure, and dBA.
Steps for checking and changing the compressor fluid level.
Procedure to verify correct motor rotation direction for safe operation.
Requirements for customer electrical connections and checks before start-up.
Step-by-step instructions for the initial start-up of the compressor.
Procedure for replacing the fluid filter element.
Procedures for replacing common parts like filters and elements.
Maintenance for minimum pressure/check valve, thermostat actuator, and coil.
Adjusting controls and maintaining the inlet control valve.
Seal replacement procedures and guidance for resolving common issues.
Electrical wiring diagram for the compressor motor and controls.
To Next Page
