Sullair ES-8-15L - Inlet Filter, Compressor Housing;Sump

Section 10
ILLUSTRATIONS AND PARTS LIST
45
10.5 INLET FILTER, COMPRESSOR HOUSING/SUMP AND PARTS- STANDARD
key part
number description number quantity
1 filter, air cyclopac 6 1/2” (I) 02250107-327 1
2 band, mounting 6 1/2” 043370 2
3 capscrew, M6 x 16MM 828006-016 4
4 washer, 6MM 865406-125 4
5 reducer, hose 2 1/2” x 2 1/4” 049779 1
6 clamp, hose 250018-550 2
7 elbow, rubber 90 2 1/2” 1 piece 02250048-321 1
8 valve, pressure relief 1/2” (200 psi/13.8 bar) 250006-938 1
9 nipple, air intake 02250047-425 1
10 hose, nylon (black) 842215-004 3
11 tee, branch swivel 1/4”T x 1/8”NPT 250025-834 1
12 plug, oil fill hex 250039-359 1
13 screw, drive #8 x 3/8” 839608-060 2
14 elbow, 90 1/8”NPT x 1/4”T 250025-849 1
15 plate, identification 250026-859 1
16 capscrew, socket M16 x 70MM 829316-070 1
17 hsg, inlet plate E08E 02250055-933 1
18 connector, tube 3/4” 811812-106 2
19 capscrew, socket M16 x 60MM 829316-060 4
20 adapter, oil filter 250025-914 1
21 element, fluid filter (II) 250026-982 1
22 washer, 8MM 865408-170 3
23 capscrew, socket M8 x 60MM 839308-060 3
24 tube, oil drain extension 02250046-999 1
25 tee, tube 3/4” 811412-075 1
26 probe, rtd 02250048-457 1
27 plug, oil 02250093-566 1
28 capscrew, M16 x 100MM 829316-100 16
29 housing, bell 250034-035 1
30 elbow, 90 1/4” x 1/4” 250025-850 2
31 bushing, reducing 1/2” x 1/8” 807102-005 1
32 fitting, compression 250028-635 1
33 o-ring, viton 3 1/8” x 1/8” (III) 826502-235 1
(Continued on page 47)
(I) For maintenance on air filter no. 02250107-327, order repair kit no. 043334.
(II) For maintenance on fluid filter no. 250026-982, order repair kit no. 02250050-602.
(III) For maintenance on air/fluid separator, order repair kit no. 02250106-791.
PLEASE NOTE: WHEN ORDERING PARTS, INDICATE SERIAL NUMBER OF COMPRESSOR