EasyManua.ls Logo

Sullair ES-8-15L User Manual

Sullair ES-8-15L
86 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
ROTARY SCREW
ES-8 Series
15, 20, 25 and 30 HP
OPERATOR’S
MANUAL AND
Part Number 02250117-368
ESullair Corporation
PARTS LIST
AIR COMPRESSOR
11, 15, 18.5 and 22KW
KEEP FOR
FUTURE
REFERENCE
Standard and Basic Models

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Sullair ES-8-15L and is the answer not in the manual?

Sullair ES-8-15L Specifications

General IconGeneral
BrandSullair
ModelES-8-15L
CategoryAir Compressor
LanguageEnglish

Summary

Section 1 SAFETY

1.1 GENERAL

General safety advice for compressor operation, installation, and user responsibility.

1.2 PERSONAL PROTECTIVE EQUIPMENT

Importance of complying with regulations for PPE such as eye, respiratory, and hearing protection.

1.3 PRESSURE RELEASE

Guidelines for pressure release valves and safe handling of pressurized air.

1.4 FIRE AND EXPLOSION

Precautions against fire and explosion hazards from lubricants and combustible substances.

1.5 MOVING PARTS

Safety guidelines for avoiding contact with moving parts and ensuring guards are in place.

1.6 HOT SURFACES, SHARP EDGES AND SHARP CORNERS

Precautions regarding hot surfaces, sharp edges, and the use of protective equipment.

1.7 TOXIC AND IRRITATING SUBSTANCES

Safety warnings about toxic substances and compressed air for breathing.

1.8 ELECTRICAL SHOCK

Safety instructions for electrical systems, grounding, and avoiding shock hazards.

1.9 LIFTING

Safe procedures for lifting, handling, and securing the compressor.

1.10 ENTRAPMENT

Safety measures to prevent entrapment when entering compressor enclosures.

Section 2 INSTALLATION

2.5 FLUID LEVEL CHECK

Instructions on how to check and maintain the compressor fluid level.

Section 3 SPECIFICATIONS

3.1 SPECIFICATIONS-ES-8

Technical specifications and performance data for ES-8 series compressors.

Section 5 SUPERVISOR II

Section 6 COMPRESSOR OPERATION- SUPERVISOR II

6.2 STANDARD PARAMETER SETUP

Guide to setting standard operating parameters like unload, load, and pressure limits.

6.4 OPERATING THE COMPRESSOR

Detailed instructions for operating the compressor in manual and automatic modes.

6.7 INITIAL START-UP PROCEDURE

Step-by-step procedure for the initial start-up of the compressor.

Section 7 COMPRESSOR OPERATION- ELECTRO-MECHANICAL

7.3 INITIAL START-UP PROCEDURE

Procedure for the initial start-up of electro-mechanical compressors.

Section 8 MAINTENANCE

8.4 FLUID FILTER MAINTENANCE

Maintenance procedures for the fluid filter, including replacement conditions.

8.6 PARTS REPLACEMENT AND ADJUSTMENT PROCEDURES

General procedures for replacing parts and making adjustments.

FLUID FILTER REPLACEMENT

Step-by-step instructions for replacing the fluid filter element.

SEPARATOR ELEMENT REPLACEMENT

Procedure for replacing the separator element.

Section 9 TROUBLESHOOTING

9.2 TROUBLESHOOTING

Chart of symptoms, probable causes, and remedies for compressor issues.

Section 10 ILLUSTRATIONS AND PARTS LIST

10.15 WIRING DIAGRAM - FULL VOLTAGE ELECTRO-MECHANICAL

Wiring diagram for electro-mechanical compressors with full voltage.

10.16 WIRING DIAGRAM -FULL VOLTAGE SUPERVISOR II

Wiring diagram for Supervisor II units with full voltage.

10.17 WIRING DIAGRAM - WYE DELTA ELECTRO-MECHANICAL

Wiring diagram for electro-mechanical compressors using Wye Delta starters.

10.18 WIRING DIAGRAM - WYE DELTA SUPERVISOR II

Wiring diagram for Supervisor II units using Wye Delta starters.

10.19 WIRING DIAGRAM - WYE DELTA- EUROPEAN

Wiring diagram for European models using Wye Delta starters.

Related product manuals