Section 4
43
FILTERS AND MOISTURE SEPARATORS
MIST ELIMINATORS
Mist Eliminators are designed to meet the demand
for:
• Efficient removal of oil-mist carryover from
piston or oil flooded rotary compressors
• Very low pressure drop
• Long service life
• Strength to withstand strenuous operating
conditions.
• Protection from oil slugs or compressor air/
oil separator failure
4.1 APPLICATIONS INCLUDE:
• Captures oil fog, mist, or smoke from
exhaust and pressure unloading vents on
oil flooded compressors, vacuum pumps
and blowers.
• Any application requiring Low Delta P
coalescing of large air volumes
• Vacuum Freeze Drying
• Vacuum Out-Gassing
• Vacuum Coating
• Food Processing
• Industrial Vacuum Processes
• Nailers/Staplers
• Cement & Paper Processing
4.2 MIST ELIMINATOR
• Removal of particles down to 0.01 micron
including coalesced liquid water and oil
providing a maximum remaining oil aerosol
content of 0.01 ppm
• Increased surface area in a given volume
allows low velocity separation of ultra fine
oil mist
• Very Low pressure drop
• Large oil catching efficiency
• Easy field cleaning
• Elements are grounded to canister mini-
mizing static electricity problems
• Positive sealing O-rings
• Temperature (continuous) min 40° F ( 4° C)
max 220° F (104° C)
• Auto Float Drain Standard
• Multiple Drain Style Options Available
• Pressure Rating of 200psig
To Next Page
Loading...
