Sullair ShopTek ST5 User Manual

ST4, ST5, ST7, ST11, ST15
4 – 15 kW (5 – 20 hp)
Three-phase 60 Hz
PART NUMBER:
88292018-236 R00
The information in this manual is current as of its
publication date and applies to compressor models
indicated on this cover with serial number:
37216100224
and all subsequent serial numbers until next revision of
this manual or release of a replacement manual.
USER MANUAL
Publication date: 03/31/2017
Copyright © 2017 Sullair, LLC. All rights reserved.
WARRANTY NOTICE
Failure to follow the instructions
and procedures in this manual,
or misuse of this equipment, will
void its warranty.
Subject to EAR, ECCN EAR99 and related export control restrictions.
SAFETY WARNING
Users are required to read the
entire User Manual before han-
dling or using the product. Keep
the User Manual in a safe place
for future reference.

Sullair ShopTek ST5 Specifications

General

Airflow Capacity	Not available
Motor Power	Not applicable
Voltage	Not applicable
Maximum Pressure	Not available
Tank Size	Not applicable
Flow Rate	Not available
Maximum Operating Pressure	Not available
Inlet/Outlet Size	Not available
Filter Media	Not available
Housing Material	Not available
Operating Temperature Range	Not available

Summary

Safety Guidelines and Precautions

Personal Protective Equipment (PPE)

Requirements for PPE like eye, hearing, and body protection.

Pressure Release Procedures

Procedures for safely releasing system pressure.

Fire and Explosion Hazards

Precautions to prevent fire and explosion hazards.

Moving Parts Hazards

Warnings about hazards from rotating components.

Hot Surfaces and Sharp Edges

Hazards related to temperature and physical edges.

Toxic and Irritating Substances

Handling of fluids and potential exposure risks.

Electrical Shock Prevention

Dangers of electrical hazards and proper grounding.

Safe Lifting Procedures

Lockout/Tagout Implementation

Procedures for energy control during servicing.

Specific Safety Warnings

Installation Procedures

Compressor Mounting and Location

Requirements for mounting surface and placement.

Sheltered Outdoor Installation

Ventilation and Cooling Requirements

Requirements for air flow and temperature control.

Service Air Piping Connection

Electrical Preparation and Grounding

Requirements for electrical connections and grounding.

Motor Rotation Direction Check

Procedure to ensure correct motor rotation.

Compressor Operation Guide

Routine Operation Steps

Steps for starting and operating the compressor.

Maintenance Procedures

Periodic Maintenance Schedule

2000 Hr / 6 Month Maintenance

Tasks for this interval.

2000 Hr / 1 Year Maintenance

Tasks for this interval.

4000 Hr / 1 Year Maintenance

Tasks for this interval.

Annual Maintenance

Fluid Maintenance Guide

Fluid Filter Maintenance

Fluid Filter Replacement Steps

Step-by-step guide to replace the filter.

Air Filter Maintenance

Air Filter Element Replacement

Step-by-step guide to replace the air filter.

Separator Maintenance

Separator Element Replacement

Belt Maintenance Basics

Belt Tension Check (Optikrik)

Belt Tension Check (Frequency Meter)

Belt Tension Adjustment

Belt Pulley Replacement and Alignment

Troubleshooting Common Issues

Diagnosing and resolving common issues.