To Next PageTo Next Page
Need help?Do you have a question about the Sullair ShopTek ST400 and is the answer not in the manual?
General| Brand | Sullair |
|---|---|
| Model | ShopTek ST400 |
| Category | Air Compressor |
| Language | English |
Operator safety guidelines and responsibilities for safe operation.
Requirements for PPE when operating the compressor.
Procedures and requirements for pressure release.
Safety precautions to prevent fire and explosions.
Warnings about keeping clear of moving parts.
Precautions regarding hot surfaces and sharp edges.
Safety measures for dealing with toxic substances.
Safety procedures to prevent electrical shock.
Guidelines for safely lifting and handling the compressor.
Safety procedures to prevent entrapment within the enclosure.
Overview of the Sullair ShopTek compressor unit design.
Detailed description of compressor components and their functions.
Explanation of cooling, lubrication, and discharge system functions.
How the control system regulates compressor output.
Description of the air filter and inlet valve.
Explanation of controller, keypad, and LCD display features.
Explanation of the meaning of the LED indicator lights.
A table detailing various specifications of the models.
General specifications for compressor type, pressure, and lubricants.
Dimensions for tank mount and dryer configurations.
Guidelines for compressor installation and mounting.
Requirements for proper ventilation and cooling of the compressor.
Guidance on installing service air piping and related components.
Information on fluid containment and drive belt checks.
How to check the fluid level in the compressor.
Requirements for electrical prep and verifying motor rotation.
Steps for starting and operating the compressor.
Overview of maintenance requirements and system indicators.
Initial maintenance tasks required after 50 hours of operation.
Scheduled maintenance tasks to be performed every 2000 hours.
Procedures for changing compressor fluid and fluid filters.
How to perform air filter maintenance and element replacement.
Procedures for replacing the separator element.
Procedures for checking and adjusting drive belt tension.
How to replace and align belt pulleys correctly.
Maintenance for hoses, tank mounts, and an intro to troubleshooting.
