EasyManua.ls Logo

Sullair ShopTek ST500 User Manual

Sullair ShopTek ST500
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Failure to follow the instructions
and procedures in this manual or,
misuse of this equipment will
VOID its warranty!
WARRANTY NOTICE
PART NUMBER:
KEEP FOR
FUTURE
REFERENCE
USER MANUAL
©
SULLAIR CORPORATION
The information in this manual is current
as of its publication date, and applies to
compressor serial number:
and all subsequent serial numbers.
02250180-090 R01
Base Mount: C03-C20350
Tank Mount: 200811010000
INDUSTRIAL AIR COMPRESSOR
SHOPTEK
ST400, ST500, ST700, ST1100, ST1500
4, 5, 7, 11 &15
KW: 5, 7.5, 10, 15 & 20 HP
Question and Answer IconNeed help?

Do you have a question about the Sullair ShopTek ST500 and is the answer not in the manual?

Sullair ShopTek ST500 Specifications

General IconGeneral
ModelST500
TypeRotary Screw
Voltage460V
Max Pressure125 psi
Phase3

Summary

Safety Precautions

General Safety Guidelines

Operator instructions, safety precautions, and compliance with regulations.

Personal Protective Equipment (PPE)

Requirements for eye, respiratory, and hearing protection during operation.

Pressure Release Procedures

Proper installation of flow-limiting valves in air lines for safety.

Fire and Explosion Prevention

Precautions against fire hazards, flammable substances, and electrical ignition sources.

Moving Parts Hazards

Keep clear of couplings, belts, pulleys, and fans; do not operate with guards removed.

Hot Surfaces and Sharp Edges

Avoid contact with hot components, sharp edges, and wear protective gear.

Toxic and Irritating Substances

Safe use of compressed air, ventilation, and handling of fluids/chemicals.

Electrical Shock Safety

Procedures for safe electrical installation, maintenance, and lockout/tagout.

Lifting and Rigging Safety

Guidelines for safe lifting and rigging procedures, including compliance with standards.

Installation Procedures

Electrical Preparation and Motor Rotation

Electrical compliance, cable sizing, and correct motor rotation verification.

Maintenance Procedures

Troubleshooting Introduction

Guide to understanding common symptoms, causes, and remedies for malfunctions.

Related product manuals