EasyManua.ls Logo

Sullair SN55V User Manual

Sullair SN55V
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
PART NUMBER:
02250247-571 R04
The information in this manual is current as of its
publication date and applies to compressor models
indicated on this cover with serial number:
201903080000
and all subsequent serial numbers until next revision of
this manual or release of a replacement manual..
Publication date: 03/27/2020
Copyright © 2020 Sullair, LLC. All rights reserved.
WARRANTY NOTICE
Failure to follow the instructions
and procedures in this manual,
or misuse of this equipment, will
void its warranty.
Subject to EAR, ECCN EAR99 and related export control restrictions.
SAFETY WARNING
Users are required to read the
entire User Manual before han-
dling or using the product. Keep
the User Manual in a safe place
for future reference.
USER MANUAL
Industrial Air Compressor
SN55, SN55S, SN55V,
SN75, SN75S, SN75V
75 & 100 hp (55 & 75 kW)

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Sullair SN55V and is the answer not in the manual?

Sullair SN55V Specifications

General IconGeneral
BrandSullair
ModelSN55V
CategoryAir Compressor
LanguageEnglish

Summary

Safety Information and Precautions

General Safety Precautions

General safety overview and user responsibilities for safe operation.

Personal Protective Equipment Requirements

Requirements for eye, respiratory, hearing protection and protective clothing.

Pressure Release Procedures

Procedures for safe pressure release during operation and maintenance.

Fire and Explosion Hazards

Precautions to prevent fire and explosion hazards from lubricants and ignition sources.

Moving Parts Safety Guidelines

Safety guidelines for avoiding hazards from rotating and moving components.

Electrical Shock Prevention Measures

Safety procedures for preventing electrical shock during installation and maintenance.

Lockout/Tagout Procedure Implementation

Procedure for safely de-energizing equipment before maintenance.

Variable Speed Drive Safety Warnings

Specific safety warnings and precautions for VSD packages.

Installation Procedures

Compressor Mounting Guidelines

Guidelines for establishing a suitable foundation and support for compressor stability.

Ventilation and Cooling Requirements

Requirements for air and water cooling systems to maintain operating temperature.

Air-Cooled Compressor Ventilation

Specific ventilation needs and clearances for air-cooled units.

Water-Cooled Compressor Cooling

Requirements for water supply, quality, and system setup.

Water Quality Recommendations

Critical water quality factors for compressor cooling system operation.

Service Air Piping Installation

Key considerations for air piping installation, including carryover and filters.

Electrical Preparation and Checks

Requirements for electrical installation, grounding, and pre-start checks.

Motor Rotation Direction Check

Steps to verify correct motor rotation for safe operation.

Maintenance Procedures

General Maintenance Overview

General safety and maintenance program overview, including service indicators.

2000-Hour Scheduled Maintenance

Scheduled maintenance tasks and checks to be performed every 2000 hours.

Fluid Maintenance Procedures

Procedures for draining and changing compressor fluid and checking levels.

Filter Maintenance and Replacement

Procedures for maintaining and replacing air and fluid filters.

Separator Maintenance Procedures

Procedures for replacing the separator element, including torque specs.

Separator Element Replacement Steps

Detailed steps for replacing the separator element, including safety warnings.

Troubleshooting Common Issues

Introduction to troubleshooting common problems and their causes.

Troubleshooting Symptom Guide

Table of symptoms, probable causes, and remedies for common compressor issues.

Related product manuals