Keypad
mode
STANDARD
MENU*
Switching on/off
Confirm
Reset alarm/ warning
Up
Alarm/warning log
Down
Condensate drain
Out
* returns to STANDARD mode after 5 minutes.
1 MAIN SWITCH I ON = dryer powered; O OFF = dryer not powered
3 ENERGY SAVING LED Lit = Dryer in energy saving phase
4
WARNING LED
5
DRAIN LED Lit = Drain open
Off = no signal
Flashing = Alarm or warning
2
POWER LED
Yellow = dryer powered
Green = Dryer operating
Reference Name Description
xzé y
Display
4
5
2
1
3
y
xé
z
è[
&
ON/OFF BUTTON RESET BUTTON HISTORY BUTTON DRAIN BUTTON
3
SRC-- 1 5 0 --- S RC -- 1000
English
5.2 Control panel (SRC--250 --- S RC -- 1000) 5.3 Operation
Operation status
With the MAIN SWITCH
& turned to “I ON” (dryer pow-
ered) three working conditions are possible:
DRYER
STATUS
[
DISPLAY POWER LED (2)
1 OFF Off Yellow
2 ON Dew point Green
3 REMOTE OFF r.OF Yellow
To switch from OFF to ON (and vice versa) pressx.
! In OFF status the unit remains powered until the MAIN
SWITCH
& is turned to “O OFF”!
Y To manage REMOTE OFF mode, remove the bridge
between terminals X4.0 and X4.17 (see par. 8.8) and connect the
remote start/stop switch (to be provided by the customer).
In ON status, use the button with the following logic:
X4.0 X4.17 X4.0 X4.17
DRYER STATUS ON REMOTE OFF
!Do not activate ON status (refrigeration compressoroperat-
ing) more than 10 times in one hour.
Energy saving function
è.
In ON mode, operating conditions permitting, the dryer reduces
energy consumption by temporarily switching off the refrigera-
tion compressor; theENERGY SAVING LED (3)comes on (see
Control Panel).
To Next Page
Loading...
