Section 3
SPECIFICATIONS
27
Figure 3-10 Piping and Instrumentation - 200HP / 150KW Water-cooled
key part
number description number quantity
1 gauge, vacuum 250042-041 1
2 filter, inlet 250039-656 1
3 switch, vacuum 02250143-577 1
4 gauge, vacuum 250042-041 1
5 valve, check inlet 250039-478 1
6 valve, butterfly -10" 41110 1
7 valve, solenoid -n.o. 3/8" reg lockout 250039-544 1
8 valve, vacuum regulating 250023-600 1
9 orifice 27443 1
10 sullicon control-dual 02250081-072 1
11 pump, rotary screw vacuum h various 1
12 cylinder, inlet control 02250083-885 1
13 gauge, temperature 42582 1
14 probe, temperature 46867 1
15 element, separator 02250049-889 2
16 sightglass 02250126-129 4
17 strainer, fluid return line 02250117-782 4
18 tnk, sep vs25/32 air/oil 02250108-462 2
19 gauge, separator differential pressure 250003-798 2
20 switch, high discharge pressure 250025-975 2
21 glass, fluid level sight 02250097-611 4
22 valve, manual drain 02250125-221 1
23 stnr, y-1 1/4" 250# 11m 02250047- 174 1
24 manf, oil 1-7/8 sae o-ring 02250112-819 1
25 element, thermal valve 175°f 49542 1
26 clr, vs32 w/sae ports 02250113-281 1
27 filter, fluid 1-5/8"sae strt thrd 02250054-605 1
28 gauge, fluid pressure differential 250003-799 1
29 valve, fluid pressure regulating 42476 1
30 gauge, fluid pressure 250024-662 1
31 switch, low fluid pressure 250017-992 1
32 orifice-.125 for 150hp or .250 for 200hp w/compr unit 1
33 orifice, .09" 02250125-776 2
34 disk, rupture 250026-247 2
35 element, separator-secondary 02250109-320 2
36 valve, solenoid-n.o. 3/8" mec valve 250039-291 1
37 silencer, vacuum regulator 250009-221 1
38 valve, solenoid-n.o. 1/4" start ctl 250039-291 1
39 orifice , .06" 02250125-775 2
40 valve, fluid pressure regulating 42476 1
To Next Page
Loading...