Sullair VS-32 - Discharge System

Section 7
ILLUSTRATIONS AND PARTS LIST
61
7.7 DISCHARGE SYSTEM
key part
number description number quantity
1 connector, flex 1/4t x 1/4p 020169 4
2 separator, oil primary rsvs25 & 32 (I) 02250049-889 2
3 plug, sight glass 1-7/8” sae 02250097-611 4
4 tank, separator vs25/32 air/oil cs 02250108-462 2
5 element, sep/sec kliner 4201 (II) 02250109-320 2
6 capscrew, hex 5/8-11 x 3.5 full th 02250112-174 8
7 pipe assembly, vs32-150/200hp disch 02250120-087 1
8 tube, vs32-150 dualtnk oil drn 02250125-116 1
9 tube, vs32-150 dual tnk drain 02250125-121 2
10 valve, ball 3/4”sae x 3/4”npt 02250125-221 1
11 tube, vs32-dual tank straight 02250125-270 2
12 joint, expansion vs32-150/200 disch/tnk 02250130-991 1
13 tee, male run swvl push vit 1/4x1/4 02250151-902 1
14 tube, tank equil vs32-150/200 02250152-684 1
15 plug, o-ring boss sae 1 1/4 040029 2
16 gasket, asa flange 150# 3” 240621-008 4
17 gasket, asa flange 150# 4” 240621-010 3
18 gasket, sep 23.25 od x 21.25 id (II) 250021-703 2
19 plug, str thd 1 1/16-12 sae vit 250025-463 2
20 connector, male1/4tube x 1/4 250025-859 1
21 disk, rupture 3” 15# 250026-247 2
22 gasket, sep elem f/oil ret ln (II) 250031-099 2
23 connector, tube-m 1/4 x 1/4 810204-025 2
24 elbow, tube 90 deg m 1 1/2 x 1 1/2 810524-150 2
25 tee, tube union 3/4 811412-075 1
26 tee, tube union 1 1/2 811424-150 1
27 connector, tube str thd 3/4 x 1 1/16 811812-106 3
(I) For maintenance on primary separator no. 02250049-889, order replacement separator element no.
02250049-889.
(II) For maintenance on secondary separator no. 02250109-320, order replacement separator element kit
no. 02250059-191, which is supplied with element, small and large gaskets.
PLEASE NOTE: WHEN ORDERING PARTS, ALWAYS INDICATE SERIAL NUMBER OF VACUUM
Continued on page 63