Sullair VS-32 - Page 69

Section 7
ILLUSTRATIONS AND PARTS LIST
63
7.7 DISCHARGE SYSTEM (CONTINUED)
key part
number description number quantity
28 connector, tube str thd 1 1/2 x 1 7/8 811824-188 2
29 flange, thrd 3” 125# ff 818312-048 4
30 nut, hex pltd 5/8-11 825210-559 32
31 o-ring, viton 4 3/4 x 1/8” 826502-248 1
32 capscrew, hex gr5 1/2-13 x 1 1/2 829108-150 8
33 capscrew, hex gr5 5/8-11 x 3 1/2 829110-350 16
34 capscrew, hex gr5 5/8-11 x 4 829110-400 8
35 washer, spr lock reg pltd 1/2 837808-125 8
36 washer, spr lock reg pltd 5/8 837810-156 32
37 washer, pl-b reg pltd 1/2 838208-112 8
38 elbow, pipe 45 deg plt 3” 866115-120 1
39 elbow, pipe 90 deg plt 1/4” 866215-010 1
40 nipple, pipe pltd 3/4 x 4 866312-040 1
41 nipple, pipe-xs plt 1/4 x cl 866404-000 3
42 nipple, pipe-xs plt 3 x cl 866448-000 3
43 tee, pipe 150# plt 1/4 866815-010 2
44 plug, pipe 1/4” 3000# stl plt 866900-010 4
45 capscrew, ferry head hd pltd 1/2-13 x 1 3/4 867308-175 4
46 tee, reducing pltd 3 x 2 x 3 867512-082 2
47 bushing, red hex pltd 2 x 1 1/2 868908-060 2
PLEASE NOTE: WHEN ORDERING PARTS, ALWAYS INDICATE SERIAL NUMBER OF VACUUM
LEGEND
A INTERNAL TO CONTROLS
B TO PRIMARY SCAVENGER LINE SIGHT GLASS
C TO SECONDARY SCAVENGER LINE SIGHT GLASS
D TO HIGH SIDE DIFFERENTIAL PRESSURE GAUGE
E TO SEPARATOR PRESSURE SWITCH
F FROM UNIT DISCHARGE PORT
G TO OIL PUMP INLET PORT
H TO FRAME COUPLING
J TO LOW SIDE DIFFERENTIAL PRESSURE GAUGE