Section 7
ILLUSTRATIONS AND PARTS LIST
47
7.4 COMPRESSOR, FRAME AND DRIVE - 200HP/ 150KW (CONTINUED)
key part
number description number quantity
19 capscrew, hex gr5 3/4-10 x 4 1/2 828612-450 4
20 capscrew, hex gr5 3/8-16 x 1 1/4 829106-125 3
21 capscrew, hex gr5 1/2-13 x 2 829108-200 16
22 capscrew, hex gr5 7/8-9 x 4 829114-400 4
23 washer, spr lock reg pltd 3/8 837806-094 3
24 washer, spr lock reg pltd 1/2 837808-125 16
25 washer, spr lock reg pltd 3/4 837812-188 4
26 washer, spr lock reg pltd 7/8 837814-219 4
27 washer, pl-b reg pltd 3/8 838206-071 3
28 washer, pl-b reg pltd 3/4 838212-112 8
29 washer, pl-b reg pltd 7/8 838214-174 4
30 elbow, pipe 90 deg plt 1/4” 866215-010 1
31 nipple, pipe-xs plt 1/4 x cl 866404-000 1
32 nut, hex 3/4-10 pltd 866512-665 4
33 bushing, red pltd 1/2 x 1/4 867102-010 1
34 bushing, red pltd 3/4 x 1/4 867103-010 1
35 cross, pipe 1/4” plt 867615-010 1
PLEASE NOTE: WHEN ORDERING PARTS, ALWAYS INDICATE SERIAL NUMBER OF VACUUM
LEGEND
A FROM CLOSED INLET CYLINDER (RELIEF PORT
B FROM SULLICON CONTROL TEE (ONE PORT PLUGGED)
C INTERNAL TO CONTROLS
D FROM SCAVENGER RETURN LINES
To Next Page
Loading...