Section 7
ILLUSTRATIONS AND PARTS LIST
51
7.5 AIR INLET AND CONTROL ASSEMBLY - 150HP / 113KW (CONTINUED)
key part
number description number quantity
27 rod end, spheical lh 5/16 042004 1
28 lever, inlet valve 20687 1
29 silencer, 1/4”npt 250009-221 1
30 adapter, air inlet 250022-606 1
31 valve, vac reg 1/2” rsvs (IV) 250023-600 1
32 elbow, 90deg m swvl 1/4t x 1/8npt 250025-849 2
33 elbow, 90deg m swvl 1/4t x 1/4 npt 250025-850 5
34 filter, inl rsvs 8” (V) 250026-119 1
35 valve, check 8” wafer 125# 250026-377 1
36 valve, butterfly 8” 40338 1
37 connector, tube-m 5/16 x 1/4 810205-025 1
38 connector, tube str thd 1/4 x 7/16 811804-044 2
39 nut, jam rh unfin 5/16-24 824605-195 1
40 nut, jam lh unfin 5/16-24 824705-195 1
41 nut, hex pltd 3/4-10 825112-665 16
42 nut, hex f pltd 5/16-18 825305-283 2
43 capscrew, ferry head hd 5/16-18 x 1 1/4 828405-125 2
44 capscrew, hex gr5 5/8-11 x 1 1/2 829110-150 2
45 capscrew, hex gr5 5/8-11 x 3 1/2 829110-350 8
46 capscrew, hex gr5 3/4-10 x 3 1/4 829112-325 16
47 capscrew, hex gr5 7/8-9 x 2 829114-200 12
48 washer, spr lock reg pltd 5/8 837810-156 10
49 washer, spr lock reg pltd 3/4 837812-188 32
50 washer, spr lock reg pltd 7/8 837814-219 12
51 washer, pl-b reg pltd 5/8 838210-112 8
52 stud, with 2 nuts 3/4-10x9 842712-090 8
53 elbow, pipe 90m/f 1/4 x 1/4 860704-025 4
54 elbow, pipe 90 deg plt 1/4” 866215-010 2
55 nipple, pipe pltd 1/4 x 4 866304-040 1
56 nipple, pipe pltd 3/8 x 1 1/2 866306-015 1
(IV) For maintenance on regulator valve no. 250023-600, order repair kit no. 250024-783.
(V) For maintenance on inlet filter no. 250026-119, order replacement element no. 250026-120, replace-
ment o-ring no. 250039-541, and replacement filter element (8”) no. 02250051-841.
PLEASE NOTE: WHEN ORDERING PARTS, ALWAYS INDICATE SERIAL NUMBER OF VACUUM
Continued on page 53