Section 7
ILLUSTRATIONS AND PARTS LIST
55
7.6 AIR INLET AND CONTROL ASSEMBLY - 200HP / 150KW
key part
number description number quantity
1 rod, 5/16-24 x 3-7/8 020685 1
2 control, Sullicon-dual vs heavy (I) 02250081-072 1
3 coupling, steel 5/16rh mx 3/4-10f 02250083-881 1
4 cylinder, hydraulic single act 2”b x 1”s 02250083-885 1
5 connector, tube male bhd 1/4 x sae 02250101-490 2
6 washer, sprlock hi clr 5/16” 02250112-561 2
7 spool, inlet 10”dia x 18”lg 02250115-862 1
8 spool, elbow 10”dia 90deg 02250117-549 1
9 filter, assembly screen filter (II) 02250117-782 4
10 valve, solenoid 2wno 3/8” 150#vac n4 (III) 02250125-538 1
11 orifice, plug brass 1/8”npt x 1/16” 02250125-775 2
12 orifice, plug brass 1/8”npt x 3/32” 02250125-776 2
13 sightglass, orf block sae 02250126-129 4
14 support, Sullicon ctltbg vs32 02250127-035 1
15 support, oil return/sightglass line 02250128-598 2
16 coupling, slv-cyl adj vs inl ctl 02250141-707 1
17 coupling, link 5/16-24f x 1/2-20m 02250141-708 1
18 coupling, stop adj vs inl ctl 02250141-709 1
19 tee, male run swvl push vit 1/4x1/8 02250151-901 1
20 tee, male run swvl push vit 1/4x1/4 02250151-902 1
21 plug, tube ftg 1/4” plstc 02250151-942 1
22 rod end, spherical rh 5/16 040136 1
23 gasket, .06 x 10.5id x 13.25od 041079 6
24 valve, butterfly 10” 041110 1
25 rod end, spheical lh 5/16 042004 1
26 silencer, 1/4”npt 250009-221 1
27 lever, inl vlv(3/4”shft)adj 250019-036 1
(I) For maintenance on Sullicon Control, order repair kit no. 250020-353, and replacement spring no.
250024-507.
(II) For maintenance on screen filter assembly no. 02250117-782, order replacement assembly no.
02250117-782.
(III) For maintenance solenoid valve no. 02250125-538, order repair kit no. 02250160-750, and replace-
ment coil no. 02250125-858.
PLEASE NOTE: WHEN ORDERING PARTS, ALWAYS INDICATE SERIAL NUMBER OF VACUUM
Continued on page 57
To Next Page
Loading...