Section 7
ILLUSTRATIONS AND PARTS LIST
59
7.6 AIR INLET AND CONTROL ASSEMBLY - 200HP / 150KW (CONTINUED)
key part
number description number quantity
57 cross, pipe 1/4” plt 867615-010 1
58 bushing, red hex pltd 1/2 x 3/8 868902-015 1
59 tee, male pipe brass 1/4 869825-025 2
A1 To compressor inlet
A2 Replace plug with elbow for dual control
PLEASE NOTE: WHEN ORDERING PARTS, ALWAYS INDICATE SERIAL NUMBER OF VACUUM
CONTROL TUBING LEGEND
A INTERNAL TO CONTROLS
B TO UNIT INLET .062 ORIFICED PORT
C CYLINDER EXHAUST TO INLET
D FROM CLOSED INLET SOLENOID VALVE
E TO AIR FILTER GAUGE ON CONTROL PANEL
F TO VACUUM GAUGE ON CONTROL PANEL
G INTERNAL TO CONTROLS
H SOLENOID VALVE MOUNTED ON STARTER BOX
J PRIMARY SEPARATOR SCAV LINE (TANK #1)
K SECONDARY SEPARATOR SCAV LINE (TANK #1)
L PRIMARY SEPARATOR SCAV LINE (TANK #2)
M SECONDARY SEPARATOR SCAV LINE (TANK #2)
N TO UNIT SIDE PORT
To Next Page
Loading...