Section 7
ILLUSTRATIONS AND PARTS LIST
65
7.8 SULLICON CONTROL SYSTEM (I)
key part
number description number quantity
1 plunger 020094 1
2 washer, back-up 021172 1
3 body, control 021635 1
4 cover, control 021654 1
5 control, sullicon rsvs heavy spring 02250081-075 1
6 capscrew, socket 1/4-28unf x 1.00” 02250150-864 1
7 pin, yoke 1/4” 040065 1
8 rod-end, yoke 040138 1
9 diaphragm, sullicon 250020-028 1
10 support, sullicon vs32-200hp 250041-664 1
11 nut,hex pltd 5/16-18 825205-273 4
12 nut,hex pltd 3/8-16 825206-337 4
13 pin, cotter ep-sc 1/16 x 3/4 827101-075 1
14 capscrew, hex gr5 5/16-18 x 1 1/4 829105-125 1
15 capscrew, hex gr5 5/16-18 x 2 1/4 829105-225 2
16 capscrew, hex gr5 5/16-18 x 2 1/2 829105-250 2
17 capscrew, hex gr5 3/8-16 x 2 1/2 829106-250 4
18 washer, spr lock reg pltd 5/16 837805-078 5
19 washer, spr lock reg pltd 3/8 837806-094 4
20 washer, pl-b reg pltd 5/16 838205-071 1
(I) For maintenance on Sullicon Control, order repair kit no. 250020-353 (quantity of one per control). For
replacement of heavy spring, order spring no. 250024-507 (quantity of one per control).
PLEASE NOTE: WHEN ORDERING PARTS, ALWAYS INDICATE SERIAL NUMBER OF VACUUM
To Next Page
Loading...