Section 7
ILLUSTRATIONS AND PARTS LIST
79
7.15 ELECTRO-PNEUMATIC CONTROL SYSTEM - DUAL CONTROL
key part
number description number quantity
1 spacer, block 2” x 3” x .38”thk 02250117-602 4
2 valve, solenoid 2wno 3/8” 150#vac n4 (I) 02250125-538 1
3 switch, pres 30”hg vac-10 psi n1 02250143-577 1
4 support, bracket vac press switch 02250144-227 1
5 switch, pressure n.o. 10 psi 250017-992 2
6 grip, cord for so 12/4 st 3/4” 250018-497 1
7 grip, cord so16/45 str 1/2” 250021-321 2
8 support, starter&clr 200hp 250022-657 2
9 elbow, 90deg m swvl 1/4t x 1/8npt 250025-849 3
10 elbow, 90deg m swvl 1/4t x 1/4 npt 250025-850 2
11 switch, press 12.5psi fixed nc 250025-975 1
12 plug, hole n4 1/2” cond 409918-002 3
13 nut, hex pltd #10-24 825202-130 2
14 nut, hex pltd 3/8-16 825206-337 4
15 nut, hex f pltd 5/16-18 825305-283 2
16 capscrew, hex gr5 3/8-16 x 1 1/2 829106-150 4
17 capscrew, hex gr5 1/2-13 x 1 1/2 829108-150 4
18 screw, hex ser washer 5/16-18 x 3/4 829705-075 2
19 screw, mach-rd hd #10-24 x 1/2 831602-050 2
20 washer, spr lock reg pltd #10 837802-047 2
21 washer, spr lock reg pltd 3/8 837806-094 4
22 washer, spr lock reg pltd 1/2 837808-125 4
23 washer, pl-b reg pltd 3/8 838206-071 8
24 washer, pl-b reg pltd 1/2 838208-112 4
25 elbow, 90deg lq-tite 1/2 846600-050 1
26 nipple, chase cond 1/2 847815-050 1
27 bushing, red pltd 3/8 x 1/4 867101-010 1
28 starter, vs n4 (II) -1
(I) For maintenance on solenoid valve no. 02250125-538, order repair kit no. 02250160-750, and replace-
ment coil no. 02250125-858.
(II) Starter may vary in accordance with machine package. Consult factory to determine proper part num-
ber.
PLEASE NOTE: WHEN ORDERING PARTS, ALWAYS INDICATE SERIAL NUMBER OF VACUUM
Continued on page 81
To Next Page
Loading...