Section 5
OPERATION
45
5.6 AUTOMATIC RE-START OPTION
This option is sometimes requested on Sullair
Vacuum Systems. Its function is to restart the pack-
age upon sensing the return of incoming power
after a power failure.
The circuit cannot discern between a return of
power after an outage and an initial power-up dur-
ing start-up or after routine maintenance downtime.
Prior to initial power-up or after routine mainte-
nance, make certain that:
1. If the machine has dual control and is equipped
with a "hand-auto" selector switch, the selector
switch is in the "hand" position.
2. If the machine does not have dual control, ta
"stop" button is in maintained stop (depressed)
position.
To Next Page
Loading...