7
2. Storage
When storing Hyponic drives for any extended period of time, consider the following important
points:
2–1) Storage Location
Store the unit in a clean, dry place indoors.
· Avoid storage outdoors or in places with humidity, dust, sudden temperature changes or
corrosive gas.
2–2) Storage Period
(1) Storage period should be less than 1 year.
(2) When the storage period exceeds 1 year, special rust prevention is necessary. Contact
the factory for details.
(3) Export models need export rust prevention. Contact the factory for details.
2–3) Use After Storage
(1) Oil seals will deteriorate when exposed to high temperatures and UV rays. Inspect the oil
seals before operation. Replace the oil seals after long-term storage if there is any sign of
deterioration.
(2) After starting the Hyponic drives or reducer, verify that there is no abnormal sound,
vibration or heat built-up. If supplied as a brakemotor verify that the brake operates
properly. If any anomaly is observed, contact our nearest agent, distributor or sales office.
DANGER
Do not stand directly under a unit suspended by a crane or other lifting mechanism;
otherwise, injury or death may result.
3. Transport
CAUTION
Exercise ample care so as not to drop the gearmotor or reducer. When a hanging bolt or
hole is provided, be sure to use it. After mounting a cyclo unit to the equipment, do not
hoist the entire machine using the hanging bolt or hole; otherwise, personal injury or
damage to the equipment and/or lifting device may result.
Before hoisting, refer to the rating plate, crate, outline drawing, catalog, etc. for the weight
of the Hyponic drives or reducer. Never hoist a unit that exceeds the rating of the crane or
other mechanism being used to lift it; otherwise, personal injury or damage to the
equipment and/or lifting device may result.
COMMON
2.Storage 3.Transport
To Next Page
Loading...