EasyManua.ls Logo

Sumitomo CX - During Operation; Maintenance

Sumitomo CX
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
HMP-1817E 6 (4/18)
! WARNING
: When using hanging bolts, please use them after you check they are
firmly tightened. After installation of product to the machine, please
do not hang up the whole machine by hanging bolts of motor.
It may result in damage to hanging bolts, injury due to overturn, and
damage of the machine.
! WARNING
: Please do not lift up only the pump sides and do not subject it to
impact. It may cause trouble.
! WARNING
: Personnel having expertise must mount, remove and install the
product.
! WARNING
: Before mounting, removal and installation of the product, please make
sure to turn the power OFF and take action to remove the remaining
pressure in the circuit. After operation, since Coolant Pump, motor
and coolant may be very hot, please take that action after you check
an appropriate temperature (30 40 ) is achieved.
! WARNING
: Please do not put flammable objects around the motor. It may cause
a risk of fire.
! WARNING
: Please do not put objects which disturb free air draft around the
motor.
It will disturb the cooling and it may cause a risk of explosion, fire or
scald due to abnormal heating.
! CAUTION
: Please do not get on, beat or apply a force to the product.
It may cause an human injury and/or damage to product.
2) During operation
! WARNING
: Please use product within the range of specified operating conditions
such as ambient temperature, temperature of coolant, etc..
If you use beyond this range, it may cause malfunction, damage to
product and fire.
! WARNING
: In case of power failure, make sure to stop the operation immediately.
In case of sudden recovery, the pump and the motor may begin to
work and it may cause human injury.
! WARNING
: In case of abnormal condition, make sure to stop the operation
immediately.
It may cause a risk of electrical shock, human injury and fire.
! CAUTION
: Since the pump and the motor becomes very hot during operation,
please do not touch them by bare hands.
3) Maintenance
! CAUTION
: Please do not disassemble or reconstruct the product without our
approval in writing. If the product is disassembled or reconstructed
without our approval, since it is beyond the scope of our warranty,
we shall not have no responsibility to such disassembly or
reconstruction.

Related product manuals